Feuling Cam Kit - 487 - Chain Drive - Race Series Lifters - M8

The Feuling Reaper Cam Kit adds power and throttle response with a performance cam profile built for your engine.

This is the 487 Series grind. See the cam specs for lift, duration and valve events, and confirm your engine's compression and valvetrain are matched to the cam before installing.

Fits Harley-Davidson Touring (2017-2025), Trike (2017-2025) and Softail (2018-2025) models. Check the fitment chart below to confirm your exact year and model.

Part of the Feuling Reaper line.

• 487 Reaper Chain Drive Camshaft, Cam Installation Kit and Race Series Lifters are included in this kit
• 487 Reaper Camshaft
• Bolt in
• Chain Drive
• 38° overlap
• RPM range 2,250 - 6,1000
• Camshaft for 114" and 117" engine
• Responds very well to increased bore and or compression
• Maintains bottom end power and pulls hard above 2,950 rpm when compared to stock
• Cam specs measured on the lifter @ 0.050 lift with 1.61 rocker arm ratio.
• Cam Installation Kit
• Includes cam bearing, cam/crank hardware and gasket/O-ring kit
• Allows for installation of the factory one piece pushrods or optional Feuling® heavy duty HP+® 0.165 wall one piece pushrods
• Race Series lifters
• Hydraulic lifters have a full 0.200 of total travel
• Designed with a slower bleed down rate to handle heavy valve spring pressures
• Increase engine RPM before valve float and feature increased roller clearance for steep ramped camshafts and clearance for the Milwaukee Eight front exhaust camshaft lobe flange
• Made in the USA
• Heavy duty one piece pushrods are highly recommended.
• Feuling® fastener kit is recommended to help prevent cylinder head cracking.
• A high flow exhaust system and air cleaner is highly recommended for optimal performance.
• High Lift valve springs are required on stock cylinder heads, Screamin Eagle cylinder heads have high lift valve springs but will need to be verified.
• Feuling® does not recommend tuning beyond stock emissions standards.